10 Amazing Fuel-Saving Tips Truck Drivers Swear By!

by | Jun 30, 2023 | Blog, Fuel-Saving, Truck Driver | 0 comments

Did you know that cutting back on even just 1 MPG could save you over $10,000 every year?

For commercial truck drivers and transport businesses alike, MPG is the most important metric. It calculates the miles traveled per gallon. Every truck driver must be familiar with the amount of fuel their truck consumes. However, by focusing a little on efficiency and maintenance, they can significantly make a difference in the MPG game. In this blog, you will learn ten of the most basic fuel-saving tips for truck drivers, so why not take a look?

  1. Keep Your Truck Well-Maintained and Serviced
    This goes without saying, but the more you pay attention to your truck, the better service it provides. A truck that runs in optimal condition and speed is less likely to eat up extra fuel, which is why regular servicing is a must.
  2. Minimize The Speed
    It can be tempting for truck drivers to zoom through the empty highway. But high speed leads to more fuel burning. Try following the basic speed limit to avoid wasting extra fuel.
  3. Take Shorter Routes
    Depending on the transport job and the location, driving for long periods of time can eat up a lot of fuel. However, taking the shortest route to your destination is the best way to combat that.
  4. Avoid Driving Aimlessly
    While it is crucial to fill the entire tank to avoid running out of it, it is just as important not to fill it to the brim. This is because fuel tends to expand when heated. If you fill it to the top, it can bubble up and leak from the tank.
  5. Maintain The Weight
    Avoid loading your truck with unnecessary weight. A commercial truck already weighs a lot, especially if it is loaded with material. Do not bring anything that is not needed.
  6. Check Tire Alignment
    Believe it or not, alignment plays a huge role in fuel efficiency. A tire tilted ¼ degree might not seem much, but it can offset your course by 10 to 15 feet per mile.
  7. Fill-up From Less Expensive Stations
    Most truck drivers know about gas stations that offer fuel for lower prices compared to others. If any such station comes under your route, make sure to fill up the tank from that place only.
  8. Avoid Overfilling The Tank
    While it is crucial to fill the entire tank to avoid running out of it, it is just as important not to fill it to the brim. This is because fuel has the tendency to expand when heated. If you fill it to the very top, it can bubble up and start leaking from the tank.
  9. Drive in High Gear
    Driving in the highest gear is a great way to maximize your MPG.a On the other hand, driving fast with a low gear setting consumes 45% more fuel than usual.
  10. Regularly Check Battery Cables and Fan
    Corroded battery cables or a messed up engine fan can disrupt your speed and waste a lot of fuel. By regularly maintaining and servicing the engine, you can prevent this from happening.

Long Story Short

In short, commercial truck drivers should be aware of the MPG they are consuming. To boost fuel efficiency, make sure to take certain steps that can help lower the overall consumption.

If you own a transport business and are looking for expert truck drivers, reach out to Casual Driver Leasing for more information at either of the following locations:

Skip to content